Technical Features That Provide Noticeable Benefits.
Top Filter Access Panel and Intake with Handle
Panel slides and lifts without difficulty to access filters for maintenance.
Metal Mesh Prefilter on Intake
Provides heavy duty large particulate filtering and protects the interior filters, extending ultrafine and VOC filtering performance.
2″ Fresh Air Intake Port
Allows for new external air to be filtered and introduced to the environment. Can be used to create a positively pressurized “safe-room” environment.
Right Side Directed Outflow
Direct and redirect clean air as needed with the versatility of front swivel castors.
Sturdy Steel Tube Cart with Rugged Tires and Castors
Navigate uneven terrain to bring clean air anywhere your work requires.
Steel Construction, Baked Thermoset Finish
Tough wear and tear resistant housing that doesn’t off-gas chemicals, true to the integrity of providing clean air!
Final 3 stages of filtration are contained and protected within a durable steel cabinet.
Perfect Seal Filter Configuration
Easy-Twist HEPA locks into place to ensure the filter is completely sealed in the unit and no polluted air leaks.
Perfect Seal 3 Stage Filtration
Capture large particulate and VOCs with the first stage foam prefilter, harmful and irritating particulate are trapped with the second stage HEPA filter that locks in place and chemical/gas pollution are adsorbed by the third stage carbon VOC filter.
Easy Twist HEPA Cartridge
Filters are convenient to access and change with just a twist of the main HEPA Cartridge.
Standard Third Stage VOC Canister
2x 1550 g of granulated carbon provide vital capture of chemical and gas pollution.
Variable Speed Control
Change the system rate of air flow to suit capture needs to the level of contaminants in the environment.
Detachable 12′ IEC Power Cord
Conveniently removes for portability and storage.
Two High Efficiency AC Backward Curved Motors
For boosted dual performance air flow at a low running cost, minimal drain on electricity resources with years of continuous performance.
(Optional) Ultra VOC Filter Upgrade
Replaces the HEPA Cartridge with a 9475 g canister of granulated carbon for cases requiring extreme chemical and gas pollution capture. Customized treated Carbon fills available upon request.
High Efficiency AC Backward Curved Motor
Allows for rigid or flexible ducting connection to configure targeted source capture of pollutants.
Is This The Right Size Unit For Me?
How many times can all the air in an area be cleaned through the filter each hour? Generally speaking, the more air changes per hour (ACH) the more effective a HEPA filter can be. The 7500 is recommended for areas up to 60,000 ft.3
|Area Size||10,000 ft.3||12,200 ft.3||15,000 ft.3||20,000 ft.3||30,000 ft.3||60,000 ft.3|
|7500||6 ACH||5 ACH||4 ACH||3 ACH||2 ACH||1 ACH|
What’s In The Box?
- 1 – 7500 Portable HEPA Air Filtration Cart System
- 1 – 12′ IEC Power Cord
- 1 – 8″D Yellow Collar
- 1 – 7500 Owners Manual
Browse Replacement Components:
- 16″ ET Standard Annual Kit x2
- 16″ ET Plus Annual Kit x2
- 16″ ET HEPA Cartridge x2
- Ultra VOC Kit
- Metal Prefilter Kit
Maximum Recommended Area Size
60,000 ft3 (provides 1ACH/hr)
Prefilter – 12 months
HEPA Filter – 3-5 years
Inner Carbon – 6 months
Dual Cylindrical Perfect Seal 3-Stage Cartridges (13” Diameter x 16” Height)
Stage One: 1/8” Foam Prefilter x2
Stage Two: 100 sq. ft Pleated Easy Twist HEPA Cartridge x2
Stage Three: 1/2″ non-woven polyester filter media imbued 200% with Activated Carbon (164 g = 180,400 m2 adsorption surface area) x2
Optional Stage Three Canister : Granulated Carbon pellets incased in steel mesh canister (1550 g = 1,705,000 m2 adsorption surface area)
Variable Speed Switch
18 gauge steel housing, durable baked thermoset powder finish.
10″ x 12″ with metal mesh prefilter x2
8″ D round x2
Fresh Air Intake
Backward curved impeller
12 foot detachable IEC cord with North American Type K Plug (3 pin grounded)