Amaircare 10,000

Category

The Amaircare 10,000 is a high-quality HEPA air purification unit that includes:

  • TriHEPA design allows for significant airflow.
  • Three individual cartridges.
  • 3-stage filtration.
  • Easy to access filters through a removable end-panel door.
  • Function speed can be modified to suit the environment.
  • Third stage VOC canister upgrade available.

Complete Delivery

Uses existing duct network in your home to deliver clean air to every room.

Bypass Installation

Mounts on the return air portion of the air handling system and does not impact the HVAC system or endanger the HVAC warranty.

Top Inflow/Outflow Connection

Bypass ducting is easily accessible on the top of the unit also allowing for compact placement alongside the air handling system.

Interior Filters

Both 3 Stage filtration cartridges are contained and protected within a durable steel cabinet.

Triple Perfect Seal 3 Stage Filtration

Three sets of filters capture large particulate and VOCs with the first stage foam prefilter, harmful and irritating particulate are trapped with the second stage HEPA filter that locks in place and chemical/gas pollution are adsorbed by the third stage carbon VOC filter.

Easy-Twist HEPA Cartridge

Filters are convenient to access and change with just a twist of the main HEPA cartridge.

Perfect Seal Filter Configuration

Easy Twist HEPA locks into place to ensure the filter is completely sealed in the unit and all polluted air is forced through the filter.

Variable Speed Control

Change the air flow rate of the system to suit your needs and levels of contaminants in your environment.

High Efficiency AC Backward Curved Motor

High performance air flow at a low running cost, minimal drain on electricity resources with years of continuous performance.

Steel Construction, Baked Thermoset Powder Finish

Durable long lasting housing that doesn’t off-gas chemicals, true to the integrity of providing clean air.

Optional VOC Filter Upgrade

Radically increases the capacity for capturing chemical and gas pollution.

Panel Access

Front panel conveniently removes for easy filter maintenance.

Specs

Colour(s)

Meteorite: 18-A-1KME-00

Filter LifePrefilter – 12 months
HEPA Filter – 3-5 years
Inner Carbon – 6 months
Optional VOC Canister – 1 year
Filter ConfigurationThree Cylindrical Perfect Seal 3-Stage Cartridges (13” D x 16” H)
Stage One: 1/8” Foam Prefilter Sleeve x3
Stage Two: 100 sq. ft Pleated Easy Twist HEPA Cartridge x3
Stage Three: 1/2″ non-woven polyester filter media imbued 200% with Activated Carbon (164 g = 180,400 m2 adsorption surface area) x3
Optional Stage Three Canister : Granulated Carbon pellets encased in steel mesh canister (1550 g = 1,705,000 m2 adsorption surface area) x3
Air Flow1000 CFM
Power Consumption600 W
Dimensions

17.3″W x 27.9″L x 47.2″H

Weight145 lbs.
Control

Variable Speed Switch

Construction

18 gauge steel housing, durable baked thermoset powder finish..

Intake/OutflowRectangular Connections 10″ x 12″
Motor

Backward curved impeller

Voltage115 volt
ElectricalStandard 115 volt plug with ground pin and 8 foot long 3 conductor 18 gauge, attached cord.

Is This The Right Size Unit For Me?

How many times can all the air in an area be cleaned through the filter each hour? Generally speaking, the more air changes per hour (ACH) the more effective a HEPA filter can be. The 10,000 is recommended for areas up to 11,250 sq. ft. with 8′ ceilings.

Area Size2000 ft.22500 ft.23000 ft.24000 ft.25000 ft.26000 ft.27000 ft.27500 ft.28500 ft.211,250 ft.2
75005.6 ACH4.5 ACH3.8 ACH2.8 ACH2.3 ACH1.9 ACH1.6 ACH1.5 ACH1.3 ACH1 ACH

Reviews

There are no reviews yet.

Be the first to review “Amaircare 10,000”

Your email address will not be published. Required fields are marked *

Additional information